Item wheel wash water recycling 'Aquador' is a closed system of water purification from suspended particles of mineral oil. Recommended for use on construction sites of the city who do not have time connection to utility networks and communications. There are various configuration items washes the wheels, including wheels for winter cleaning. Technical conditions for laying tiles and installation of the pit. When using the facility without welded trestles road plates are placed parallel to each other with a slope inward at an angle of 10 degrees to the horizontal. In the space between them is placed U-shaped channel or groove is concreted with a bias toward pit for drainage. General bias toward the pit 5-10 degrees. Pit dimensions 1.5 * 1.5 * 1.5 concreted.
Can be laid in a half-brick walls, filled the bottom layer is 10 cm Also, instead of concreting, it is possible to use a welded, airtight container (sheet 2,0-2,5 mm). Submersible pump is suspended in a pit so that the distance of the bottom pump was at the height of 15-20 cm from the bottom of the pit. As the silt pit needs to be cleaned. Otherwise, can not exclude the possibility of breakage of blades pump with stones, rinse with plates. CSB Group of Companies has all the necessary documentation to install wheel wash items with a closed cycle Aquador. The principle of operation of the plant working Water Installation of water recycling washing the wheels of trucks designed for water purification from large suspended particles of sand, clay, soil and other contaminants of this nature at this Purified water is returned for reuse.