Ceviche Cooking Techniques

In the recipe for ceviche fish cooks in cold, or that never receives heat (oven or stovetop,) for example. This makes a cooking mode quite particular. It can serve as an input or as a main dish. Ingredients: 800 g grouper (a filet. Other white firm meat fish can be used.

Pollock, for example) limes 5 units ginger 14 g (once crushed will be approximately two tablespoons) (a bunch of leaves) 20 g coriander pepper 2 units 1/2 red onion unit preparation cut the ginger and the pepper brunoise (small cubes of 2 mm of side) and mix with the juice of limes. This juice may be prepared using a juicer or simply cutting limes to the middle and then flowing with the help of a fork. Adicionarl chopped cilantro and set aside. Cut the grouper bites of about 1 or 2 cm thick. If prepared with larger pieces the central part will be crude, and is not what is being sought. Mix the fish with the game previously prepared and add salt. This preparation Let stand at least 20 minutes before serving.

Meanwhile, ciselar onions and wash with water and salt. This involves placing it in a container, salt and cover with water. Let it stand for a few minutes, drain and repeat the procedure two or three times. In this way the onion will remain tasty but much less strong. Add onion to the rest of the preparation just before serving. Traditionally, this dish can be accompanied with corn or boiled sweet potato, sweet potato, salt field (Andean corn) or weeds (algae).

State Standards

The process of 'dry' drying oils such as occurs due to evaporation of the solvent, and as a result of interaction processes oils with oxygen. Combined varnish marks R3, R5 designed for the manufacture of paints for interior and exterior. Combined varnish brands K2, K4, K12, K11, paint, used only for internal operations. Linseed oil 'Oksol B' is used for dilution to a viscosity of oil-based paints gustotertyh MF only for internal operations. LMS (polymerized linseed oil) is a natural substitute for linseed oil and is used for both domestic and for exterior colors.

Gliftalievaya linseed oil is made from vegetable oil, glycerine, etc. of the solvent content of no more than 50%. Pentaphthalic linseed oil is also made from an alkyd resin. Artificial drying oils (synthol, karbonol, etc.) do not contain any oils at all, or in small quantities. As for the quality they are far inferior to natural drying oil and oksolem.

Alkyd varnish – are solutions of alkyd resin modified oils. They are glyptal, pentaphthalic and ksiftalevye. By the way linseed oil are the so-called artificial drying oils, including oil-free products based on the polymerization of petroleum hydrocarbons, oil shale, and fish oils etc. Thus, oil paints are a mixture of pigments, fillers (talc, barium sulfate, barite) and linseed oil. State Standards issued by oil paints the following brands (depending on the type of film-forming substance): MA-021 – for natural drying oil; MA-025 – on a combined drying oil, GF-023 – on glyptal drying oil, PF-024 – on pentaphthalic drying oil. The number 2 indicates that the paint, varnish diluted appropriate, be used on any surface. Ready to eat paint hit the market are packed in containers of 0.5-3 liters. The labels stated purpose of paint, color, flow rate at 1 m surface with single and double layer coatings used thinners, etc. Should strictly adhere to these guidelines.